3D model ready to import into Bamboo Studio and print.
Cylinder 180mm diamater, 170mm tall.
Cylinda has 2 parts removed:
1. 100mm by 180mm from top face to 20mm from bottom face.
2. 50mm by 180mm at exactly 90 degrees to 1 above. From top face to 70mm from bottom face.
Cylinder 180mm diamater, 170mm tall.
Cylinda has 2 parts removed:
1. 100mm by 180mm from top face to 20mm from bottom face.
2. 50mm by 180mm at exactly 90 degrees to 1 above. From top face to 70mm from bottom face.
End result is a jig to hold two 100mm by 50mm beams at exactly 90 degrees to each other where the bottom one is sitting flat on its wide edge and the top one is sitting on its narrow edge.
Posted On: August 18, 2024 10:55 UTC
Category: 3D Modeling & Rendering
Skills:3D Printing, 3D Modeling
Skills: 3D Printing, 3D Modeling
Country: Australia
click to apply