I will be engraving 500 pens and I need something to hold them, so I can quickly switch them out and have them aligned perfectly with my laser. I can only engrave 1 pen at a time, so this will only hold 1 pen.
This is where I will mark then pens: https://app.screencast.com/Ny2hL9AkD0zn4
For the fixture, here are the dimensions of the pen:
Length 134.40mm: https://app.screencast.com/lykqBbqZSrLS6
Width at bottom: 9.51mm: https://app.screencast.com/etVvCkSXmcPl7
Width at top, including clip 13.87mm : https://app.screencast.com/s8ksCJ9tK0cMx
Width at top without the clip 10.95mm: https://app.screencast.com/6rtUoJMToNvT1
width of clip 4.05mm: https://app.screencast.com/TeD7cQcARe3LZ
When pen is placed in fixture, I need i to position the pen so I can easily engrave this location: https://app.screencast.com/Ny2hL9AkD0zn4?conversation=CIeUzarIjQfnK4wWXB1jlI
For the base of the fixture, make it 150mm x 150mm
My laser table is threaded for M6 (6mm diameter) screws and the holes are 25mm apart from center to center, it looks like this: https://app.screencast.com/TAKNvfGz9j9Is
I will need slots like this to mount our fixture to my table: https://app.screencast.com/bHRCePGK8hAXc
I need this file right away, within 12 hours from now. Please respond "I can do this now" to let me know you read full details.
Thank you for your time!
Brian
Budget: $50
Posted On: April 09, 2024 05:51 UTC
Category: 3D Modeling & Rendering
Skills:3D Design, 3D Modeling
Skills: 3D Design, 3D Modeling
Country: United States
click to apply