– Entry Statement NewTech Wood fence & wall cladding
– Entry Statement Signage & backing plate – HDPVC
Item 1
Supply & Install Kangaroo Paw Sculpture
– As per drawings: L7.102 Rev O IFC
– ~3.34m Tall x 1900mm wide
– Rolled / curved stems
– 114.5×5.4mm main lower stems
– 76 x 5.9mm mid stems
– Curved CHS 76×5.9mm single stems
– Fabricated tapered/smooth sleeve joints
– Curved 8mm Laser cut Flowers
– Paint – Colour graduation to leaves
– 1200x1200x300mm Pad footing to spec
– Stems fully welded to 16mm base plate
– 250x250x6mm fabricated SHS riser
– 16pL 500×500 Footing base plate
– 4 x M20 Chemi-anchors
Item 2
Supply & Install NewTech Wood fence & wall cladding
– As per drawings: L7.102 Rev O IFC
– ~14.7lm Fence & 2.25lm Cladding
– Cladding 1.8m high, Fence 1.8m high
– 100x50x4 RHS Posts w base plate
– Plate connections fence to masonry wall
– 75 x50x3 RHS Rails (3)
– All post and rails to have welded end caps
– 56 x 30mm NewTech Fence Battens
– 70 x 17mm Cladding to wall
– All steel powder coated
– Fence posts into 600diax1000mm deep concrete footing
Item 3
Supply & Install Signage & Backing plate
– As per drawings: L7.101/2
– Fabricated 3D lettering ~90 & 30mm thick
– HDPVC White Logo & Lettering
– 1 x 822mm Dia flower motif
– "Wildflower" 470mm high Lettering
– "PIARA WATERS" 375mm High Lettering
– 12mm pL backing plate
– 150x50x6mm RHS upright supports
– 10mm Base plates 340×150
– All steel powdercoted
– Chemi anchors as per spec
Budget: $400
Posted On: March 20, 2024 00:15 UTC
Category: 3D Modeling & Rendering
Skills:3D Modeling
Skills: 3D Modeling
Country: Australia
click to apply